Generally speaking, the iron gate should be installed with electric control lock, which is a mechanical lock device controlled by relay. At present, a series of products with different structures have been formed, including electric plug-in lock, electric control lock, etc. The following small series will introduce how to install the electric control lock on the door.

Jinan iron gate

要把鐵藝大門的詳細情況弄清楚，電控鎖有分磁力鎖和插銷鎖。磁力鎖較簡單，直接安裝就可以，插銷鎖可能存在走線問題，盡量選隱蔽的地方用小金屬管布過去。無論哪種鎖，都須裝閉門器，否則難有效果。閉門器就是一種可以自動把門關閉上的一種裝置。

First of all, we should make clear the details of the iron gate. The electric control lock is divided into magnetic lock and bolt lock. The magnetic lock is relatively simple and can be installed directly. The bolt lock may have wiring problems. Try to choose a concealed place and use small metal pipe to lay it. No matter what kind of lock, it is necessary to install a door closer, otherwise it is difficult to have an effect. Door closer is a device that can automatically close the door.

電控鎖的安裝關鍵是門口機和室內機連線，如果是網線連接的話，就很容易操作，直接插上就行了。如果是有幾種不同顏色的芯線，只要把門口機和室內機的接線柱分別接上對應顏色的線就可以。

The key to the installation of the electronic lock is the connection between the door machine and the indoor unit. If it is connected by the network cable, it is easy to operate and plug it in directly. If there are several different colors of the core wire, as long as the door machine and indoor machine terminal respectively connected with the corresponding color wire.

一般電控鎖有兩條線，只要分別接上可視門鈴的兩個電動鎖接線柱就行了。也可以給鐵藝大門單獨設計一個個性化的電控鎖，門禁的電控，它的工作電源是12V交流，用市電做常用電源，兩塊6V免維護蓄電池做備用，開門時使用鑰匙或者用電控，關門時不用。通過開門指令電瓶供電只有幾秒鎖上的線只有兩根即可。

Generally, there are two wires for the electronic control lock. Just connect the two electric lock terminals of the visual doorbell respectively. You can also design a personalized electric control lock for the iron gate. Its working power supply is 12V AC, the common power supply is the city power supply, and two 6V maintenance free batteries are used as standby. When opening the door, use the key or electronic control, and do not use it when closing the door. The battery power supply is only a few seconds through the door opening command, and only two wires can be locked.

關于鐵藝大門電控鎖安裝方法介紹，文中已經進行了比較詳細的講解，在以后的操作使用中，大家要根據文中講解的內容進行大體的操作安裝，才能保證設備的正常使用。希望你能夠有所掌握。

About the iron gate electric control lock installation method introduction, this article has carried on the quite detailed explanation, in the later operation use, everybody must carry on the general operation installation according to the article explanation content, can guarantee the normal use of the equipment. I hope you can master it.